Hey there vape fans, welcome to another MtBaker Vapor product spotlight. My name is Lisa and today we're going to be going overthe Atlantis replacement coils. So we've got them right here, let's see what we've got.So this will be a five pack of replacement coils. Here we are. So there's your five pack.And so the coils are pretty straightforward, so we're going to show you how to replaceone of these in the Atlantis tank. So here we've got our single coil, and it's a littlebit bigger than most of the other ones because it's a sub ohm coil. And these coils righthere come in 0.5 ohms. It's pretty straightforward to replace your coil, so we're just goingto open this from the bottom here because
it's a bottom coil tank. Then right here wehave our old coil. So this just screws right out, you can throw that away and then replaceour new one. Now when you put a new coil in one of these tanks it's a really good ideato prime it, so just take a couple drops of juice and put it right down here in the center.Make sure it doesn't go all the way down, but you want to wet the wick down in there,and then we can put it right back on. And it's like brand new. Alright if you have anycomments or questions be sure to leave them in the comment section below. Like or subscribeto our channel if you find them interesting. And we'll see you next time.
Aspire K2 Tank
Hi everyone! My name is Alicia with DFW Vapor. Today we are going to go over the new K2 Tank from Aspire. Alright, and this tank is going to hold 1.8mls of juice, and it's going to use the Aspire BVC coils Let's see. I'll show you, you guys. This is going to be perfect to upgrade from those disposable tanks. The ones for the pen styles. It's going to fit really nicely on your Ecig, if you can see it.
Alright, I'll go ahead an show you guys how to prime it. If you forget, it come with a little card in the box. A little warning label, and it will show you exactly how to prime it. But, for now I will show you. To fill this tank, there is a little stem in the middle of it and your going to want to tilt it to the side like this. and then that's when you're going to pour it to the side. If you pour it straight down the middle it's going to go straight through the mouth piece and make a big mess So you just fill to the side Up to that top black ridge there.
And then to prime your atomizer you do five to six drops straight to the top there. And you'll see that kind of hole in the middle that you can pour it down. But, five to six to the top so. One. Two. Three. Four. Five.
Six! And there is also these little wicking material (inlets) on the side that you can wick as well. One. Two. Three. Four. Five. Six!
And then you want to be sure that the coil is nice and saturated before you get going. This will save life on your atomizer, and it will also make the flavor a lot better from the get go. So once you prime your atomizer you are going to set it back down in there. Then just screw it down. And then once you have it back on your battery you are going to want to do dry pulls without pressing the button Five to six of them should be OK. And that way it will taste nice and ready for you. Thank you guys for tuning in!
Like our Facebook and our Twitter page and our Instagram! Yall have a great day!.